Alfa-Tek Australia - products Hilosystems

>> Embedded Development Tools

Hilosystems has been an industry standard for Device Programmers since 1983 supplying application software for its various industrial uses.

ALL-100 supports device programming for a variety of device types covering EPROM, EEPROM, Serial PROM, flash, PLD/CPLD/FPGA, MPU/MCU, etc. Most of programmable devices in DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, or BGA package types can be programmed on a DIP48 Programming Module directly or through an appropriate ADAPTER/CONVERTER.

ALL-100

Introduction

ALL-100 supports device programming for a variety of device types covering EPROM, EEPROM, Serial PROM, Flash, PLD/CPLD/FPGA, MPU/MCU, NAND Flash, RS-MMC/MMC/SD Card etc. Most of programmable devices in DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, or BGA package types can be programmed on a DIP48 Programming Module directly or through an appropriate ADAPTER/CONVERTER.

ALL-100 features high-tech pin drivers to provide excellent programming quality at high speed, high reliability and high expansion flexibility. All pin drivers built in ALL-100 are fully programmable to meet modern programming / testing needs, including newly released low voltage devices in the market.

A high speed USB port is provided to connect to the majority of notebook or desktop PC running under Windows 98 SE/Me/2000 SP4/XP SP1/Server 2003. Up to 8 sets of ALL-100 can be run simultaneously via tiered star USB to achieve the highest throughputs.

ALL-100 is the most powerful Single-Socket Universal Programmer designed to help engineers to tackle today's challenges in device programming. Moreover, according to the different programming time and package type, up to 8 sockets Universal Gang Module are optional for you to save the future expansion cost in your small & medium scale production lines. You may refer to the ALL-100/GANG opt. to have a clearer concept!

Features & Benefits

Excellent Performance - Utilizing flexible pin drivers to get accurate waveforms, high programming speed plus over current protection, self-diagnostics, etc. ensure ALL-100's excellent performance.

Wide IC Coverage - Over 9,000 device types, covering EPROM, EEPROM, Serial PROM, Flash, PLD/CPLD/FPGA, MPU/MCU, NAND Flash, RS-MMC/MMC/SD Card etc. in package type of DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, BGA, etc., can be programmed.

Inherit ADAPTER/CONVERTER from ALL-series - Over 500 ADAPTERs, 150 CONVERTERs can be used with Single-Socket Programming Module to ensure your capital investment retained.

Ideal for Engineering as well as Production Environment - Wide device coverage, and flexible future expansion capability help users to achieve time-to-market challenge.

Multiple Sites Working Simultaneously - Via tiered star USB topology, up to 8 sets of ALL-100 can be connected to one PC to achieve the highest throughputs.

Easy to Use - Running under Windows. After master read or file download from PC, user only needs to select Blank check, Program, or Auto function from Menu, then hit YES key on programmer to start programming function. Operation is very easy.

Release New Device Support via Internet Weekly - New device support S/W at no charge.

Worldwide Service - Distribution channel covers more than 40 countries worldwide. Your enquiries & comments could be solved or submitted from anywhere around the world.

Specifications Device Support
	Pin Count : from 8 pins up to over 300 pins Device Type: covering EPROM, EEPROM, Serial PROM, Flash, PLD/CPLD/FPGA, MPU/MCU, NAND Flash, RS-MMC/MMC/SD Card etc.

Device Contact
	Default - DIP48, Textool. Others - SOP, TSOP, PLCC, QFP, MLF, SDIP etc. through optional CONVERTERs or ADAPTERs.

Max. Sockets in Parallel
	Up to 8 sockets on Optional Universal Gang Programming Module

Controller
	16 bits high-speed controller with big size FPGA & CPLD.

Interface Port
	1x USB port.

Data Transfer Rate
	USB 1.1 : 12 Mb/S USB 2.0 : 480 Mb/S

Max.Sites in Parallel
	Up to 8 sets of ALL-100 can work together through USB Hubs.

Functions
	Load file, Read Master, Program, Verify, Auto, ID Check, Checksum, Blank Check, Erase, Secure, Protect/Unprotect, Edit, Function Configuration, Self-Diagnostics.

Host Computer Requirements
	An Intel Pentium or compatible processor with 64MB of RAM. An Intel Pentium or compatible processor with 64MB of RAM. 20 MB free hard disk space under Windows 98 SE/Me/2000 SP4/XP SP1/Server 2003 operating system CD-ROM Driver.

Power
	AC voltage - 100 - 240 VAC. Frequency - 50 - 60 Hz Power consumption - 50W

Dimension
	L x W x H - 260mm x 150mm x 100mm.

Weight
	4 KG.

Operating Temperature
	0-40^oC(32-105 ^oF)

Safety Certificate
	CE Approved.

Ordering Information

ALL-100 : Consist of 1x ALL-100 Base Unit with Single-Socket Programming Module (M1-UN-DP48), 1x USB cable ( type A to type B ), driver S/W and device support list in CD-ROM.

Option 99 : Price deduction when selecting other programming module to substitute for M1-UN-DP48 as ALL-100 standard accessory.

Optional Accessory

ALL-100-PIN CARD : Additional PIN driver card to be mounted on ALL-100 Base Unit. Necessary only when ALL-100 programs under any Gang Modules or TSOP flash Module.

USB Interface Card : Approved interface card, PCI BUS, provides USB 2.0 environment to ALL-100, and runs under Windows 98/ Me/ 2000/ XP.

Programming Modules : Optional accessory to be announced. Support ALL-100 to program various device types directly, including up to 8 sockets Universal Gang Module, and 1 socket TSOP Universal Module. Please refer to MODULE LIST on the HI-LO web site.

ADAPTERs : Support high pin count devices from 48 to over 300 pins. Please refer to ADAPTER LIST on the HI-LO web site.

CONVERTERs : Convert signal into different package types covering PLCC, QFP, SOP, TSOP, BGA, etc., and ranging from 8 up to 48 pins. Please refer to CONVERTER LIST on the HI-LO web site.